Camellia Glass Flush Mount Ceiling Light

Add the room’s length and width in feet; the total is roughly the ideal fixture diameter in inches. The 3-light (Ø 13.8″) suits hallways, closets and rooms up to about 8 × 8 ft, the 4-light (Ø 17.7″) suits bedrooms and kitchens around 9 × 10 ft, and the 6-light (Ø 23.6″) suits living rooms and larger bedrooms of 12 × 12 ft and up.

Flush mounts are ideal for ceilings of about 7–9 ft, where a hanging fixture would feel too low. At just 6.3–7.5″ tall, the Camellia keeps plenty of headroom in hallways, bedrooms and closets while still reading as a decorative piece.

Each light uses an E26 or E27 medium base socket: the 3-light takes 3 bulbs, the 4-light takes 4 and the 6-light takes 6. Bulbs are not included, so you can choose the brightness and color temperature you prefer. LED A19 bulbs are a good choice because they run cool inside the glass and last far longer than incandescent bulbs.

Brightness depends on the bulbs you choose. As a guide, bedrooms and hallways need about 10–20 lumens per square foot and kitchens about 30–40, so an 800-lumen LED bulb in each socket gives the 4-light about 3,200 lumens, plenty for a typical bedroom.

Yes. Use dimmable E26 or E27 bulbs together with a compatible wall dimmer. You can buy dimmable bulbs locally, or we can supply them with your order; just contact us at support@liootrlamp.com.

No. The white glass panels diffuse the light, so from below you see an even, milky glow rather than bright spots. The brass outlines between the petals stay visible as a decorative pattern when the light is on.

The frame, center plate and finial are brass in a warm brass color, and the scalloped panels are white glass. Brass gives the outlines a crisp, durable edge, while the glass softens and spreads the light.

Yes. It is rated for AC 110–240V, covering the 120V supply in the United States and Canada and 220–240V supplies in most other countries. Use bulbs rated for your local voltage.

The Camellia is hardwired and mounts directly to a standard ceiling junction box, with the glass petals fitted after the base is secured. We recommend installation by a licensed electrician in line with local electrical codes.

Switch off the power and let the bulbs cool, then unscrew the brass finial at the center to release the glass shade. Lower it carefully with both hands, replace the bulbs, and refit the shade and finial.

Switch off the power and let the fixture cool first. Wipe the glass with a soft cloth lightly dampened with mild glass cleaner, and dust the brass frame with a dry microfiber cloth, avoiding abrasive or ammonia-based cleaners.

The Camellia is designed for indoor dry locations such as hallways, bedrooms, closets, kitchens and living rooms. It is not rated for outdoor use or for wet areas directly above a bath or shower.

Every Camellia ceiling light is covered by our 365-day warranty. If anything is not right with your fixture, contact us at support@liootrlamp.com and we will help you resolve it.