Bellora Black & Cream Dome Wall Light

Bellora combines rounded metal shades, a slender horizontal frame, and a circular wall plate. The contrast between the curved shades and clean structural lines gives this wall light a modern retro character that works with a variety of interior styles.

Its open-bottom shades allow the bulbs to be seen from certain angles below the fixture, making bulb selection part of the overall appearance. The one-, two-, and three-light configurations offer different visual compositions, while the body finishes and shade colors help you coordinate the fixture with furniture, hardware, and surrounding décor.

Bellora is available in three configurations:

• 1 Light: W 22 × H 20 cm / approximately W 8.7″ × H 7.9″.
• 2 Lights: W 46 × H 20 cm / approximately W 18.1″ × H 7.9″.
• 3 Lights: W 61 × H 20 cm / approximately W 24.0″ × H 7.9″.

Width describes the fixture’s horizontal span, and height describes its overall vertical dimension. Inches are approximate conversions from the stated centimeter measurements.

Wall projection and backplate dimensions are separate measurements. If you need to clear a mirror frame, shelf, cabinet, or existing electrical box, ask Liootrlamp to confirm those dimensions before ordering.

Start by comparing the fixture’s width with the wall area and the furniture or decorative feature beneath it. The one-light version creates a more contained accent, the two-light version provides a balanced paired arrangement, and the three-light version creates a broader horizontal composition.

Consider visual scale and lighting performance separately. More lamp holders provide more positions for bulbs, but the final brightness depends on bulb lumen output, shade color, placement, and surrounding surfaces. For selection assistance, send Liootrlamp a photograph of the wall, its available width, and the measurements of nearby furniture or artwork.

The specified construction material for Bellora is metal, including its dome-shaped shades. The available body finishes are brass-tone, antique bronze, black, and polished nickel .

These names identify the surface finish or color option. They should not be interpreted as confirmation that the complete fixture is made from solid brass, bronze, or nickel.

When coordinating Bellora with existing hardware, compare the overall tone and surface appearance rather than relying on a finish name alone. Different manufacturers may use similar names for finishes that vary in warmth, sheen, or depth of color.

The standard body finish options are brass-tone, antique bronze, black, and polished nickel. The standard shade colors are white and black.

A darker frame can create a defined outline against a pale wall, while a warmer metallic finish can coordinate with wood, earthy textiles, and warm-toned hardware. White shades offer a lighter visual presence; black shades introduce a stronger graphic accent.

The appearance of a finish can change with daylight, surrounding colors, and screen settings. Confirm that your preferred body-and-shade combination is available for the selected configuration before placing your order.

Yes. Bellora supports customization of both the body color and the shade color.

For a useful consultation, provide the product name, your selected one-, two-, or three-light configuration, and a clear color reference. Explain whether you want to coordinate the fixture with cabinet hardware, wall paint, furniture, or another feature in the room.

If a particular sheen or surface appearance matters to your project, describe that separately from the color. Our team can check the request and confirm feasibility, pricing, and the preparation schedule. Exact color matching should be discussed and agreed upon before a custom order is confirmed.

Discuss a custom body or shade color ↗

Bellora uses E26 or E27 bulbs, depending on the version supplied . The one-light configuration has one bulb position, the two-light configuration has two, and the three-light configuration has three.

Confirm the supplied socket type before purchasing bulbs. The bulb’s voltage rating, dimensions, shape, and permitted wattage must also suit the fixture. Because the shades are open underneath, the visible portion of the bulb can influence the finished appearance.

Compare lumen output when choosing brightness. Ask Liootrlamp to confirm the maximum permitted wattage, suitable bulb dimensions, and whether bulbs are included with your selected version.

Dimming compatibility needs to be confirmed for the particular version you intend to purchase. The presence of an E26 or E27 socket does not, by itself, establish that the complete installation will work with a particular dimmer.

If dimming is important to your project, tell Liootrlamp before ordering and provide information about the control you plan to use. The fixture, bulbs, and dimmer must be compatible as a complete system.

For an LED installation, the selected bulbs must support dimming, and the dimmer must support those bulbs and the connected load. Have your installer review the combination before installation.

Bellora is specified for indoor use with an IP20 rating. Plan to use it in dry interior locations, such as a suitable entryway, hallway, living room, or bedroom.

Do not assume that every wall position in a bathroom is appropriate simply because the fixture fits above or beside a mirror. Placement near water, steam, or condensation requires a separate suitability assessment.

If you are considering a bathroom or another moisture-prone space, contact Liootrlamp before purchasing and have a qualified local installer assess the proposed location against the fixture’s rating and applicable installation requirements.

Bellora is designed for wall mounting. Before installation, confirm the selected fixture’s dimensions, wall projection, backplate measurements, and mounting arrangement against your wall and electrical connection point.

Consider nearby mirror frames, shelves, cabinet doors, artwork, and walking routes. The fixture should fit the available space without creating an obstruction or conflicting with surrounding features.

Have a qualified installer verify the wall support, mounting hardware, electrical supply, and connections. Do not assume that the fixture can be rotated, installed with the shades facing upward, or mounted in another orientation unless that arrangement has been confirmed for the supplied version.

Choose the bulbs according to the purpose of the room and the other lighting already present. A warmer light appearance may complement relaxed living spaces and warm finishes, while a more neutral appearance may suit a different interior palette or activity.

For brightness, use lumen output rather than wattage alone as your comparison. Shade color, installation height, nearby wall finishes, and the number of bulbs can all influence the result.

Bellora’s open-bottom metal shades create a different light distribution from an enclosed translucent shade. For a balanced room, consider how the wall light will work alongside ceiling, table, or floor lighting.

Switch off the power and allow the bulbs and fixture to cool before cleaning. For routine care, gently remove dust with a clean, soft microfiber cloth.

If further cleaning is needed, confirm the appropriate method for your selected finish. Avoid abrasive pads, harsh solvents, and metal polishes unless Liootrlamp has confirmed that they are suitable for the surface. Keep moisture away from sockets, connections, and the wall mounting area.

Do not twist the shades or pull on the horizontal bar while cleaning. If a component needs to be removed, follow the supplied instructions or contact our team before loosening any fittings.

The average preparation time is 5–10 days before dispatch . Preparation time is separate from shipping or transit time and should not be treated as the total delivery period.

A custom body color or shade color may require a different schedule. Confirm the timing for your selected configuration and customization request before placing the order.

If the fixture is needed for a renovation, an installation appointment, or a specific project deadline, share that date with Liootrlamp in advance. Our team can discuss the preparation schedule and available delivery information for your destination.

Include the Bellora product name, preferred configuration, body finish, shade color, and quantity required . For a custom color, attach a clear reference image and describe any surface appearance or sheen you want us to consider.

For sizing or placement assistance, provide the available wall width, nearby furniture or mirror dimensions, and a photograph of the intended installation area. Include your destination country so the supplied electrical version can be discussed.

For product advice or customization, email support@liootrlamp.com . Our team can review the details and confirm the available options before you order.