Coralie Textured Glass Pendant Light with Curled Petal Edges

The Coralie Amber Textured Glass Pendant Light by Liootrlamp combines a cylindrical form with glass panels that curl outward at the top and bottom. These curved ends create a petal-like outline, while the fine grid texture gives the glass a woven appearance. A brass-colored metal frame and suspension chain complete its vintage-inspired character.

Its visual interest comes from the relationship between these details: the vertical panels provide structure, the curled edges soften the silhouette, and the amber color introduces a warm decorative tone. This makes Coralie a considered choice for interiors where the light fixture should contribute texture and character as well as serve a practical purpose.

Coralie is available in two sizes. Both have a 40 cm / 15.7″ fixture body height, with different diameters and bulb counts:

Choose by considering the fixture’s relationship to the table, island, or surrounding architecture. The 36 cm version has a narrower profile, while the 58 cm version creates a broader visual presence. Measure the intended location and consider nearby cabinetry, doors, and sightlines before deciding.

Bulb count alone does not establish how bright the room will feel. The selected bulbs’ lumen output, the room dimensions, surface colors, and other light sources also affect the result. Send Liootrlamp your room measurements and a photo if you would like help comparing the two sizes.

Coralie is an indoor pendant light that can be styled above a dining table, in an entryway, or over a kitchen island. Its amber glass and brass-colored frame complement warm wood, neutral upholstery, natural stone, and vintage-inspired furnishings. In an open-plan interior, a coordinated arrangement can also help connect the dining and kitchen areas visually.

Amber glass can influence the apparent color of light passing through it. The final appearance also depends on the bulb’s color temperature, brightness, and the room’s surrounding finishes. For tasks that require accurate color judgment or concentrated work light, consider Coralie as part of a layered lighting plan that includes suitable task lighting.

Indoor suitability should not be interpreted as a wet-location rating. Contact us to confirm suitability before specifying the fixture for a bathroom, damp area, or any location exposed to moisture.

The confirmed materials are metal and glass. The standard frame is described as brass-colored, and the standard glass color is amber. “Brass-colored” refers to the appearance of the finish; it should not be taken as a statement that the frame is made from solid brass.

This distinction matters when coordinating materials across a project. If you are matching the pendant to existing cabinet hardware, taps, furniture, or other lighting, share reference images and your preferred finish with Liootrlamp. Photographs and screen settings can affect how a finish appears, so discuss any close color-matching requirements before placing a custom order.

Coralie is specified with E12 or E14 bulb bases, depending on the ordered configuration. These are different socket sizes, so confirm the actual base supplied with your fixture before purchasing bulbs. The small version uses four bulbs, and the large version uses eight.

If you prefer LED bulbs, select a model that matches the fixture’s confirmed socket, electrical supply, permitted bulb dimensions, and maximum wattage. The bulb should fit comfortably within the shade without contacting the glass or other components. Bulb shape also affects how visible the light source is through the textured panels.

Please ask Liootrlamp to confirm the maximum permitted wattage, suitable bulb dimensions, and whether bulbs are included in your order. These details should be established before making a separate bulb purchase.

The product is listed for AC 110–240V. Confirm the configuration supplied for your destination and ensure that the chosen bulbs are rated for the actual electrical supply where the fixture will be installed. The fixture’s stated voltage range does not mean that every E12 or E14 bulb is suitable for every voltage within that range.

Dimming compatibility has not been specified for this model. A matching bulb base or an LED bulb does not, by itself, establish that the complete installation can be dimmed. If dimming is important, contact Liootrlamp before ordering to confirm fixture compatibility and the requirements for the bulbs and dimmer.

Have your installer verify the selected components and local installation requirements before connecting the light.

Yes. Coralie supports flat-ceiling and sloped-ceiling installation. With a chain-suspended pendant, the fixture hangs vertically beneath the ceiling connection while the lamp body remains level. The installation diagrams in the product details illustrate this general orientation.

For a sloped ceiling, provide the ceiling angle, ceiling height, and intended fixture position before ordering. This allows the mounting arrangement and required drop to be checked against your project. The illustrations are schematic and do not establish a maximum supported ceiling angle or show every installation component.

Your installer should verify that the ceiling structure, mounting hardware, and electrical connection are appropriate for the supplied fixture. Confirm any project-specific mounting requirements with Liootrlamp in advance.

The standard suspension chain is 150 cm / 59.1″ long. A longer chain can be requested if your ceiling height or installation layout requires a greater drop. Share your required length before ordering so the suspension and corresponding wiring requirements can be discussed together.

Chain length is different from overall installed height. The listed 40 cm / 15.7″ dimension describes the fixture body; the complete drop also involves the canopy, connection hardware, and the chain length used in the final installation. Do not treat the chain measurement alone as the total ceiling-to-bottom dimension.

If you need a shorter installation, ask us to confirm the available adjustment method and minimum achievable drop. Providing the desired height of the fixture’s bottom edge helps clarify what your room requires.

Start with the height of the tabletop or island, the ceiling height at the mounting point, and the position where you want the bottom of the pendant to sit. These measurements allow the required overall drop to be calculated before determining the suspension arrangement.

Check the planned position from both seated and standing viewpoints. The fixture should complement the surface below it while preserving useful sightlines and clearance for everyday activity. For an entryway or another circulation area, consider the tallest users, nearby doors, and the path people take through the room.

There is no single hanging height that suits every room. Coralie’s 40 cm body height must be included in the planning, along with the canopy and suspension hardware. Share these measurements with Liootrlamp and your installer before finalizing the drop.

Yes. Coralie supports glass color and frame color customization, as well as requests for a longer suspension chain. The standard combination shown for this product is amber glass with a brass-colored metal frame.

For a custom request, send Liootrlamp the product name, preferred size, desired glass color, preferred frame color, and any chain length requirements. Reference photographs, finish samples, or a room palette can help communicate the result you want. Glass color can also change the visual character of the fixture when illuminated, so consider its appearance both during the day and after dark.

Ask our team to confirm available options, pricing, preparation time, and the terms that apply to the proposed configuration before placing your order. Specific colors and exact matches should be agreed in advance.

Disconnect the power and allow the fixture and bulbs to cool before cleaning. For routine care, use a clean, soft microfiber cloth to remove dust from accessible glass surfaces and the metal frame. Work gently around the curled glass edges and avoid putting pressure on individual panels.

Keep moisture away from sockets, wiring, and electrical connections. Do not spray cleaning products directly onto the assembled fixture. Avoid abrasive pads, polishing compounds, and unapproved chemical cleaners, which may damage the finish or leave residue in the glass texture. Follow any care instructions supplied with your order.

If a panel requires removal or the fixture is difficult to reach, contact Liootrlamp for model-specific guidance rather than loosening components without instructions. Use suitable professional assistance where access or handling requires it.

The average preparation time is 5–10 days. This refers to the period before dispatch and is separate from shipping transit time. If you are coordinating a renovation, electrician visit, or project handover, confirm the expected dispatch and delivery schedule before setting an installation date.

Before ordering, check your selected size, bulb base, destination voltage, ceiling type, required drop, and preferred colors. Confirm bulb inclusion, maximum wattage, and dimming compatibility if these affect your purchase. For a custom configuration, have the agreed specifications and preparation schedule confirmed by our team.

Sending these details together helps Liootrlamp understand your project and respond accurately. Include a room photo and measurements when possible, particularly for sloped ceilings, taller spaces, or installations requiring a longer chain.